Application Instructions

Applying our stickers is easy with this step-by-step guide. Follow the instructions for a perfect result. @Mike Bos shows you how it’s done. Don’t forget to check out his YouTube video for more details and his awesome Fristi 2.0 vlog.

• Make sure the surface is clean, dry, and free of grease
  
• Use a soft cloth and a degreaser (such as isopropyl alcohol) to remove dust and dirt
  
• For best adhesion, work at a temperature between 10°C and 25°C

• Carefully remove the sticker from the packaging
• For loose letters, thin stickers, or designs with multiple parts: use the included application film
• Cut the application film to size and place it over the sticker to keep everything in position
• Determine the correct position on the surface and, if needed, mark it with tape as a reference

(only for stickers that are difficult to apply by hand)

Application film is especially useful for:

• Loose elements that can easily deform (e.g., words or small logos)
  
• Stickers made of multiple parts that need to stay in a fixed pattern
  

How to use:

• Place the sticker with the application film on the desired spot
  
• Press firmly using a squeegee or soft cloth
  
• Slowly peel off the application film at an angle of about 45°, leaving the sticker neatly in place
  

• Remove the backing paper from the sticker
• Carefully place the sticker on the surface, starting from one side
• Press evenly with a soft cloth or squeegee to prevent air bubbles

• For very large stickers, it can be tricky to apply them neatly, especially over curves or corners. To make the sticker more flexible:
  
• Ask a second person to help – one person holds the hair dryer while the other applies the sticker
  
• Gently heat the sticker with the hair dryer on a low to medium setting. Keep the dryer a few centimeters away and move it slowly back and forth so the sticker becomes warm and pliable
  
• 
  While the sticker is warm, you can bend and shape it over corners or curves. Work calmly from the center outward to avoid air bubbles
  
• 
  Let the sticker cool for a moment once it’s in place; this ensures it keeps its shape and adheres firmly
  
  💡 Tip: Do not overheat the sticker, as this can cause deformation or damage
  

• Make sure the sticker is firmly attached and that there are no air bubbles remaining
• If needed, carefully use a needle to pop small air bubbles, then smooth them out with a squeegee or soft cloth

• Let the sticker rest for 24 hours to ensure it adheres properly
• During this time, avoid extreme weather conditions such as rain or strong heat

• If everything went well, feel free to send us a photo or video! We’re always curious to see our customers’ creations
• Enjoy your new look and many safe kilometers ahead! 🚀

• Do you have a scratch on your rear fairing while the rest of your scooter still looks good? No worries – you don’t need to order expensive €200 fairings
  
• Lightly sand the area and apply a sticker over it. This neatly covers the damage and gives your scooter a completely fresh, new look – without the high costs